PELCO Glue Gun粘合劑噴槍16068

1.PELCO Glue Gun粘合劑噴槍16068
2.PELCO Glue Gun熱熔膠槍16068-現貨
3.PELCO Glue Gun手動膠槍16068-現貨
4.PELCO Glue Gun噴膠槍 16068-桑戈生物
5.PELCO Glue Gun原裝進口膠槍16068-桑戈生物

貨號：16068
包裝：1個/箱
價格：電議
該產品有現貨，期貨平均到貨時間2周，另有特快加急服務（7天到貨）
產品描述：
粘合劑噴槍為某些特定的粘合需求提供實用的幫助。
熱塑性膠棍通過噴槍型的設計來融化并且付諸應用。舉個例子，對于掃描電鏡標本臺，用膠帶或者圓盤粘附劑固定的較重或者較大的樣品在研究觀察時可能會移動，而如果用噴槍的話可以將標本更加牢固的固定在標本臺上。表面噴碳的標本和粘合劑會允許形成一個放電通路。較低的溫度范圍（100° to 120°C / 212°- 248°F）是更加適合的，比如我們的16068型，可以避免高溫可能對熱敏感標本造成的損壞。（高溫粘合劑噴槍的正常標準溫度是在190° to 210°C / 374° to 410°F一個范圍）。膠凝固非常快，因此在用時應迅速固定好標本的位置。如果需要重新更換位置，可以用噴槍將粘合膠軟化。多孔標本如果覺得放電通路過于薄弱可以在標本表面覆蓋粘合劑以減少該狀況。顆粒標本可以撒到硬化粘合劑表面。
A thermoplastic glue stick is used with a gun-type design to melt the glue and allow its application, for example, to an SEM specimen mount. Heavier and/or larger specimens, which might move during study when held with a tape or disc adhesive, will hold firmly in place when this type of adhesive is used to "seat" the specimen. Carbon coating the specimen and the adhesive will permit an electrical discharge path. A lower temperature range (100° to 120°C / 212°- 248°F) is preferable, such as our model 16068 to avoid possible damage to heat sensitive specimens. (Normal temperature for standard high temperature glue guns is in the 190° to 210°C / 374° to 410°F range). The glue hardens quickly so the specimen should be positioned promptly upon glue application. If re-positioning is required, the glue may be softened with the Glue Gun.
Porous specimens such as felt with a poor discharge path may accept a track of glue over its surface to reduce such static. Granular specimens may be sprinkled onto the hardening surface.
References:
Barish L, August 1990. The Use of the Common Glue Gun in Light and Scanning Electron Microscopy. Paper presented at INTER/MICRO-90, Chicago, 19-22.
Barish L, 1992. Mounting of Specimens for SEM with the Common Glue Gun. Proc 50th Ann Meeting of the Elec Mic Soc of America. pp 410-411.


Prod # Description Unit
16068 Glue Gun, Low Temperature each
16068-2 Glue Sticks, Ø .437" x 4" L (Ø 11mm x 101.6mm L), Low Temperature pkg/18